HomeCalendarFAQSearchMemberlistUsergroupsRegisterLog in

Share | 
 

 Sexy Beast - DesignsByStina

Go down 
AuthorMessage
Admin
Admin


Posts : 43
Join date : 2018-07-06

PostSubject: Sexy Beast - DesignsByStina   Sat Jul 07, 2018 3:29 pm

ScrapKit Name: Dogtober
Scrap Designer : Designs By Stina

Sample:

Discloser:
This tutorial assumes you have good working knowledge of Paint Shop Pro and its tools. It was created and written in PspX2 but may be done in previous versions. My tutorials are from my own creative imagination any resemblance to other tutorials is strictly coincidental. If I am using a brush or mask that belongs you and I don't have you listed please let me know which tutorial and which item is yours include your designer name and website information so I can give you credit and remove them from the materials. I am copyright compliant so any tutorial that has a tube whether it is a Pay To Use (PTU) or Free To Use (FTU) will never be included in my materials. The same goes for scrap kits.
 
Do Not re-write , copy or claim any of my tutorials as your own as the are all copyrighted.   (JZ8Q-RWIP-N1BZ-VKR7) Under the US CODE 17 §5.03

 
Materials Not Included:

 
Settings Used Throughout
Drop Shadow: 2, 2, 100, 4, #000000
 
Tutorial Instructions
 
Step 1: Open the CollabTempMzDixiApril.psd , Shift+D and close original

  • Delete the crinfo layer
  • Highlight the mask1 layer
  • CTRL+A, CTRL+F, CTRL+SHIFT+F
  • Layers:  New Raster layer


Step 2: Open paper02. CTRL+C and close

Step 3: Ensure your new layer is active

  • CTRL+SHIFT+L
  • CTRL+D
  • Change blend mode to multiply
  • Do Not Delete the original layer


Step 4: Highlight the mask2layer

  • CTRL+A, CTRL+F, CTRL+SHIFT+F
  • Layers: New Raster layer
  • CTRL+SHIFT+L
  • CTRL+D
  • Change blend mode to multiply
  • Do Not Delete the original layer


Step 5: Repeat step 4 for mask3 and mask4 layers

Step 6: Highlight the bigpinksquare layer

  • CTRL+A, CTRL+F, CTRL+SHIFT+F
    Layers: New Raster Layer


Step 7: Open paper 10, CTRL+C and close

Step 8: Ensure your new layer is active

  • CTRL+SHIFT+L
    CTRL+D
  • Effects: 3D Effects: Dropshadow using the settings above
  • Delete original layer


Step 9: Open leaves 3, CTRL+C and close

Step 10: CTRL+L and move to the left. (see mine for placement)

  • Effects: 3D Effects: Dropshadow using the settings above
  • Step 11: Highlight the outterbk layer
  • CTRL+A, CTRL+F, CTRL+SHIFT+F
  • Layers: New Raster Layer


Step 12: Open paper 12, CTRL+C and close

Step 13: Ensure your new layer is active

  • CTRL+SHIT+L
  • CTRL+D
  • Effects: 3D Effects: Dropshadow using the settings above change to (-2) (-2
  • Delete original layer


Step 14: Highlight the innersquare layer

  • CTRL+A, CTRL+F, CTRL+SHIFT+F
  • Layers: New Raster Layer


Step 15: Open paper0 3, CTRL+C and close

Step 16: Ensure your new layer is active

  • CTRL+SHIFT+L
  • CTRL+D
  • Delete original layer


Step 17: Highlight upperdkpinkrectangle layer

  • CTRL+A, CTRL+F, CTRL+SHIFT+F
  • Layers: New Raster Layer


Step 18: Open paper 07, CTRL+C and close

Step 19: Ensure your new layer is active

  • CTRL+SHIFT+L
  • CTRL+D
  • Delete original layer


Step 20: Highlight the pinklines layer

  • CTRL+A, CTRL+F, CTRL+SHIFT+F
  • Layers: New Raster Layer
  • Flood Fill with #FFFFFF (white
  • CTRL+D
  • Delete original layer


Step 21: Repeat step 19 for the lowerpindkkretangle and the pinklines2 layers

Step 22:Highlight the lowerpinkretangle layer
CTRL+A, CTRL+F, CTRL+SHIFT+F

Step 23: Open paper05, CTRL+C and close

Step 24: Ensure you are on the lowerpinkrectangle layer

  • CTRL+L
  • CTRL+SHIFT+I
  • Hit the Delete Key
  • CTRL+D
  • Effects: 3D Effects: Dropshadow using settings above change to 2, (-2)
  • Delete original layer



Step 25: Repeat for the upperpinkrectangle
Effect: 3D Effects: Dropshadow using settings above change to (-2),2

Step 26: Highlight the pinkinnercircle layer

  • CTRL+A, CTRL+F, CTRL+SHIFT+F
  • Layers: New Raster Layer


Step 27: Open paper04, CTRL+C and close

Step 28: Ensure your on new layer

  • CTRL+SHIFT+L
  • CTRL+D
  • Delete Original


Step 29: Highlight the pinkdots layer

  • CTRL+A, CTRL+F, CTRL+SHIFT+F
  • Layers: New Raster Layer
  • Flood fill with #000000 (black)
  • CTRL+D
  • Delete original layer


Step 30: Highlight the pinkcircleframe

  • CTRL+A, CTRL+F, CTRL+SHIFT+F
  • Layers: New Raster Layer


Step 30: Open up paper11, CTRL+C and close

Step 31: Ensure your on new layer

  • CTRL+SHIFT+L
  • CTRL+D
  • Effects: 3D Effects: Dropshadow using settings above (original)
  • Delete original layer


Step 32: Highlight wordart layer
CTRL+A, CTRL+F, CTRL+SHIFT+F

Step 33: Open paper01, CTRL+C and close

Step 34: Ensure you’re on the wordart layer

  • CTRL+L
  • CTRL+SHIFT+I
  • Hit the delete button
  • CTRL+D
  • Delete original layer
  • Highlight the wordart outline



Step 35: Open  doghouse, CTRL+C and Close

Step 36: Ensure on the canvas

  • CTRL+L
  • SHIFT+S: 250 px (width) all layers unchecked
  • Move slightly to the left and up (see mine for placement
  • Effects:3D: Dropshadow: Use settings above (original)
  • Move this layer below the wordart online layer
  • Step 37: Open dog01, CTRL+C and Close


Step 38: Ensure on the canvas

  • CTRL+L
  • SHIFT+S: 250 px (width) all layers unchecked
  • Move to the opening of the dog house (see mine for placement)
  • Adjust: Sharpness: Sharpen
  • Effects: 3D: Effects: Dropshadow:apply


Step 39: Open dogo2, CTRL+C and close

Step 40: Ensure on the canvas

  • CTRL+L
  • Move to the right above the word beast (see mine for placement)
  • Effects: 3D Effects: Dropshadow: apply


Step 41: Open ball, CTRL+C and close

Step 42: Ensure on the canvas

  • CTRL+L
  • SHIFT+S: 270 px (width) all layers unchecked
  • Move slightly to the left and down (see mine for placement)
  • Adjust: Sharpness: Sharpen
  • Effects: 3D Effects: Dropshadow apply

    Step 43: Open dogtag04, CTRL+C and close

    Step 44: Ensure on the canva

    • CTRL+L
    • Move to the left side and over the first white line. (see mine for placement)
    • Effects: 3D Effects: Dropshadow: change to (-2)(-2)


    Step 45: Open dogtag02, CTRL+C and close

    Step 46: Ensure on the canvas

    • CTRL+L
    • SHIFT+S: 300 px (width) all layers unchecked
    • Move to the left over the top of the previous dogtag (see mine for placement)
    • Adjust: Sharpness: Sharpen
    • Effects: 3D Effects: Dropshadow:  use the settings above (original)


    Step 47: Open heartribbon2, CTRL+C and close

    Step 48; Ensure on the canvas

    • CTRL+L
    • SHIFT+S: 420 px (width) all layers unchecked
    • Move to the upper and to the center (see mine for placement)
    • Adjust: Sharpness: Sharpen
    • Effects: 3D Effects: Dropshadow apply
    • Move this layer under the dog house layer


    Step 49: Merge all flatten

    • SHIFT+S: 500 px (width) check all layers
    • Add copyright and text
    • File: Save As: .jpg

     
    Thank you for trying my tutorial “Sexy Beast”. I hope you enjoyed it. Any questions or concerns please contact Karma
    Happy Creating!
Back to top Go down
View user profile http://cbk4you.forumotion.com
 
Sexy Beast - DesignsByStina
Back to top 
Page 1 of 1
 Similar topics
-
» Beast RLSH arrested

Permissions in this forum:You cannot reply to topics in this forum
 :: My Tutorials :: Pay To Use (PTU) Tutorials-
Jump to: